How To Light Pilot Light On Gas Fireplace Insert. Pull the match or light away when the burner lights. The pilot position is typically set on the control dial with either the dial depressed and turned, or used with a separate spark button to light the pilot flame.
While pressing down the control knob in the pilot position, press the ignition switch. Depending on how long it’s been since the gas fireplace was last used, ignition may take several attempts before igniting. Once you have given any excess gas a chance to dissipate, follow the instructions in your system’s manual to relight the pilot.
Read And Follow The Instructions That Came With You.
One of the biggest problems associated with gas fireplaces is related to the pilot light. You can try cleaning out the pilot assembly yourself before doing anything else. If the pilot does not light, wait 5 minutes and try again.
The Main Burner Flame Will Not Come On Or Stay Mygasfireplacerepair Com.
Pull the match or light away when the burner lights. A pilot light that doesn’t glow blue is also a problem, as this means it is not getting hot enough. Often times a pilot light won’t turn on, resulting in absolutely zero flames happening in your fireplace.
Turn The Gas Key To Release Gas To The Burner.
While pressing down the control knob in the pilot position, press the ignition switch. The pilot knob should have the options “off,” “pilot” and, in some models, “on.” here’s how to light a gas fireplace with a.then, carefully wiggle the insert out of the fireplace and remove it.then, depending on the type of insert you purchased, the fireplace insert may need to be connected to. The pilot should start as soon as the flame is close enough.
Push The Igniter Button Once Every Second Until It Lights.
Turn the safety control valve knob to the pilot position. Relighting the fire safety tips for your old gas fireplace quicken loans. If the log set has a switch on it, place it in the off position.
How To Turn On A Gas Fireplace Angi Angie S List.
Once you insert the key, do not turn it until after preparing your lighter, otherwise you may release a dangerous amount of gas into the room. Hold the knob for about one minute, then let it go. Hold the gas control button down while you hold the end of a lighted match or lighter at the end of the pilot tube.